Click image to view full size image
Enjoy Your Water with Confidence: Our Reverse Osmosis membrane can remove up to 99% of over 1,000 contaminants from your water, including lead (removes up to 98% of lead), chlorine, fluoride, arsenic, asbestos, calcium, sodium, and more.
Top-notch Quality: Our Reverse Osmosis Membrane is made of food-grade high-capacity material that provides high packing density to remove contaminants. it only allows water molecules to squeeze through and virtually nothing else.
Energy Saving: Low-Pressure Operation (125 psi) for Lower Power Consumption and Reduced Operating Costs.
Standard Size: With 12" X 2.68" industry-standard size, our membrane fits most standard under-sink RO membrane housings. It has the capability of producing 300 gallons of water per day depending on the product type, ensuring that families of nearly any size will have plenty of clean drinking water available on demand.
Peace of Mind Customer Service: We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help!
Â
Â
|
Product |
Average Permeate Flow |
Average Salt Rejection % |
Test conditions |
||||
|
NaCl |
Pressure |
Temperature |
pH |
Recovery Rate |
|||
|
Pro-LP-1812-50 |
≥50(0.19) |
≥97.0 |
350mg/L |
70psi |
25°c |
6.5~7.5 |
15% |
|
Pro-LP-1812-75 |
≥75(0.29) |
≥97.0 |
350mg/L |
70psi |
25°c |
6.5~7.5 |
15% |
|
Pro-LP-2012-100 |
≥100(0.38) |
≥97.0 |
350mg/L |
70psi |
25°c |
6.5~7.5 |
15% |
|
Pro-LP-2012-150 |
≥150(0.57) |
≥97.0 |
350mg/L |
70psi |
25°c |
6.5~7.5 |
15% |
|
Pro-LP-2012-400 |
≥400(1.52) |
≥97.0 |
350mg/L |
70psi |
25°c |
6.5~7.5 |
15% |
|
Pro-LP-2812-300 |
≥300(1.14) |
≥97.0 |
350mg/L |
70psi |
25°c |
6.5~7.5 |
15% |
|
Pro-LP-3012-400 |
≥400(1.52) |
≥97.0 |
350mg/L |
70psi |
25°c |
6.5~7.5 |
15% |
|
Pro-LP-3013-400 |
≥400(1.52) |
≥97.0 |
350mg/L |
70psi |
25°c |
6.5~7.5 |
15% |
|
Pro-LP-3013-500 |
≥500(1.90) |
≥97.0 |
350mg/L |
70psi |
25°c |
6.5~7.5 |
15% |
|
Pro-LP-3013-600 |
≥600(2.28) |
≥97.0 |
350mg/L |
70psi |
25°c |
6.5~7.5 |
15% |
Â
Due to variations in feedwater quality, membrane elements under standard test conditions may have a 15% deviation in permeate flow
The stated product performance is based on data collected after 30 minutes of operation at the following test conditions
Â
SIZE: mm/Inch
|
Model |
A |
B |
C |
D |
E |
|
Pro-LP-1812-75 |
1.75 |
0.72 |
0.87 |
0.87 |
12.00 |
|
Pro-LP-2012-100 |
1.81 |
0.72 |
0.87 |
0.87 |
12.00 |
|
Pro-LP-2812-300 |
2.68 |
0.72 |
0.87 |
0.87 |
12.00 |
|
Pro-LP-3012-400 |
2.91 |
2.91 |
0.87 |
0.87 |
12.00 |
|
Pro-LP-3013-600 |
2.68 |
0.72 |
0.78 |
0.78 |
13.00 |
Â
Â
Â
|
Operating Limits |
Unit |
Value |
|
Maximum operating pressure |
psi (MPa) |
600(41) |
|
Maximum feed water temperature |
°F (°C) |
113(45) |
|
Continuous operation pH range |
 |
3-10 |
|
Cleaning PH range |
 |
2-11 |
|
Maximum feed water SDI15 |
 |
5 |
|
Maximum residual chlorine concentration of influent |
ppm |
<0.1 |
Â
Â
Store in a cool and dry place (below 45°C) away from sunlight.
Permeate from the first hour of operation should be discarded.
Keep elements moist at all times after initial wetting.
To prevent microbial growth in the Wet Membrane Element, it is recommended to wash it with a 1.0% Sodium Metabisulfite (food grade) solution, followed by vacuum-bag packing the
Membrane Element and storing it in a cardboard box.
Only use chemicals compatible with the membrane elements and components. Bright Star Water will not accept any responsibility for the use of incompatible chemicals.
Â
http://www.psitfn.com/